METAL ROOF INSTALLATION & MAINTENANCE
The roof is beyond any doubt the most wear-resistant part of Your home. It must withstand cold, wind, sun, rain and snow withal enduring occasional mechanical impacts. Proper metal roof installation and maintenance can ensure its optimal function and attractiveness for many years to come. Look at Your metal roof; other people do.
All types of roofs have their weaknesses, a roof is not an exception. With decent metal roof installation, its regular inspection and maintenance of Your roof, You can prolong its life significantly. Make it a habit to inspect Your metal roof annually, spring can serve best for that. Most problems can be resolved, but when it’s nearly time to change Your roof, it’s better to do so sooner than later. If You wait too long, the underlying structure may be seriously damaged and a new metal roof installation shall be unavoidable.
CHECKLIST FOR ANNUAL INSPECTION
Annual inspection is essential to be able to maintain the sound condition of Your metal roof systematically and efficiently. With this information, You can take the necessary steps to prolong the life of Your roof and minimize the risk of metal roof installation out of season. Make the following checklist:
In most cases, rain will keep Your metal roof clean. However, there occurs a build-up of dirt that cannot be washed away with rain. Normally, a soft brush and water will suffice, but You may need to use a special detergent to clean Your roof.
Metal roof installation process may cause minor scratches, however, they can be restored with a little touch-up paint. A fine brush is used to apply the paint to the damaged areas. Meanwhile, be sure to apply it carefully only for the damaged areas for a touch-up paint will age differently than the paint on the surrounding surfaces.
Scratched or slightly damaged areas of a metal roof may quickly lead to corrosion. Therefore, it is very important to repair it as soon as possible.
1. Scrape, sand or sandblast the area to remove loose organic material.
2. Remove all rust by sandblasting or sanding the damaged area.
3. Clean the area with an alkaline degreasing solvent, rinse thoroughly and allow the surface to dry completely.
4. Paint the entire area with a zinc-based basecoat.
5. Then, paint the entire area with a finishing coat, preferably in a color that matches the original.
Take care of Your metal roof, it is the place You need to live under!